All-steel Zepter 50m hull and superstructure launches in Croatia...

< < Go back

All-steel Zepter 50m hull and superstructure launches in Croatia...

Industry News

She was fabricated at the Kraljevica Shipyard. The striking exterior and naval architecture are by Srdan Dakovic.

JANUARY 2010

These pictures were taken in December ’09 soon after she went into the water. Fit-out will begin soon.
Her beam is 9.4m (30ft 10in) and her eventual displacement will be around 545 tonnes, 606GT. The draught should be 2.3m (7ft 6in).
Pushed along by Cummins KTA38M-1, providing 1,100hp (821kW) at 1,800rpm, her maximum speed should be just under 15 knots and the range at a 13-knot cruise should be 3,500nm.
She is being built to Bureau Veritas (BV) classification and Croatian Register of Shipping (CRS) rules.
She is intended as a charter boat and was commissioned by Split, Croatia-based Propela, a subsidiary of Philip Zepter’s Zepter International Group.

For more, Srdan Dakovic (sdakovic@inet.hr)
Or www.brodkr.hr

© Phil Draper